Aluminum aerial work platform for shopping malls, hotels, restaurants, interior decoration, layout, spatial light wire, pipes, doors and windows repair, maintenance and cleaning, and apply to the area or narrow space room space operations.

First, the operation uses

1, before the job will be open to the support arm 135 ° (see figure), rotating wire cylinder legs, adjusted the base level, fasten safety rope, check whether the limit switch firmly sensitive control buttons are normal, can operate platform lift, working height when raised to operating staff must be equipped with seat belts, and locked in the body and solid objects.

2, lifting operations: lifting is divided into control, dual-use flashlight, marked by the symbol, and use the former Attorney hand pressure valve is closed, when the job a sudden power failure, release hand pressure valve, this time slow down to lift lowest position.

3, lift operations, power cord diameter of not less than 4 square mm, length of over 20 meters.

4, when the job do not fall within the article chute.

5, are not allowed to work overload.

6, did not lift lowest position, you are not allowed to move the machine.

7, stormy weather prohibits outdoor work.

Second, pay attention:

1, the vertical lift removable body to prevent body deformation and leakage.

2, the attention of staff to carry tools and spare parts, do not fall inside the cage, to prevent bad card chain.

3, before using the machine first empty liter once, carefully observe all parts are normal without abnormal sounds, once discovered, should stop using; use by qualified service personnel After commissioning (electrical components warranty for three months). Third, the daily maintenance:

The machine is indoor, outdoor use should be used in the geological hard ground, in order to avoid the occurrence of subversion, adjusted once every 20 times the chain screw, screw adjusted once a safety rope, electrical and hydraulic systems maintenance by qualified personnel